If your heater fails to warm up your car, you may be experiencing a cooling system issue. Coolant is pumped through the car engine, resulting in hot coolant circulating through the car’s heating system. With this in mind, here are eight common cooling system issues that could result in a heater problem and some maintenance steps to address these issues.
According to Repair Pal, this valve opens and closes as the car reaches its intended temperature. When a thermostat is unable to close, the car may not be able to heat up as effectively. A bad thermostat could also cause other problems in a car, such as triggering the dashboard’s check engine light. Generator Oil Cooler
If your car is experiencing a broken thermostat, a mechanic can install a replacement. If you are familiar with car maintenance, you could even test and replace it yourself.
Coolant hoses and the clamps that secure them can experience various issues, including clogged hoses and unsecured clamps. Problems like this can affect how your heater runs, but the good news is that these problems are easy to spot during an inspection.
Replacing old clamps and hoses will solve this issue and help your heater. After installing new parts, always ensure that they are correctly connected and that there are no leaks in your car.
Your water pump is responsible for circulating coolant in your car. It can be a common source of issues for a heating system. Water pumps can leak and sometimes lose their ability to circulate coolant properly. When a water pump is old and has problems functioning, a mechanic will likely recommend having it replaced.
Engine fans provide extra cooling to a vehicle when coolant alone is not enough to reduce the engine temperature enough. Sometimes, though, the engine fan cannot be turned off, which can prevent coolant from warming up to be used in the heater.
Replacing the thermostatic switch that controls the engine fan enables the fan to be turned off again, which will help the heater problem.
Radiator caps open and close to help prevent pressure in a cooling system from reaching extremely high levels. However, broken caps get stuck, preventing coolant from getting adequately hot.
A mechanic will easily be able to diagnose a radiator cap issue, and replacing the cap should get your heater back up and running again.
Coolant leaks can create a bubble of air known as an air lock, and these air locks can disrupt the regular circulation of coolant. When coolant is unable to circulate as it should, heating problems can occur.
Addressing an air lock is something that drivers can do without going to an auto shop. Running the engine with the heater turned up as high as it can go and with the coolant tank cap open for a few minutes can help to remove the bubble that has formed in the coolant.
This is one of the most straightforward issues that can cause a heater to struggle. If your car does not have enough coolant, the heater core will be unable to warm up the vehicle effectively.
To fix this issue, add more coolant to your car. From here, keep checking whether your car can continue to stay warm. If you encounter more heating problems, then there could be a leak.
How to Finance a Used Car, According to Consumer Reports
When a radiator leaks coolant, the coolant level may be insufficient to operate the car’s heating system. You can detect radiator leaks by checking for puddles under your car.
Plate Fin Radiator A mechanic will likely be required to address this. Some radiator problems can be fixed, but otherwise, you will need a new radiator.